How to make a wavy hem on a dress

1. • by : buydresses - Jul 3rd, 2015

   • You can upgrade quickly and easily wardrobe, making corrugated sheaths at home. The work is fun and simple, and you can use contrasting lines or decorative stitches to make a skirt so unique as you are. A wavy hem turns even the simplest skirt or dress cheap wedding ceremony accessory sets(http://www.weddingdresstrend.com/en/wedding-ceremony )  into something special and fun, but buy clothes with these bars can get expensive.
     Instructions
     1. Place the main fabric and the lining together with the reverse side up. Make sure that the bottom edges are aligned and trim them if necessary. Glue stabilizer in the main fabric inside out, according to the manufacturer’s instructions. The stabilizer is a fabric that will add a little support to the waves, but remain invisible when wearing the outfit. Secure the bottom edges at regular intervals using pins.
     2.Prepare sewing machine according to the manufacturer’s instructions, using appropriate line and needle to the tissue that is using. Baste the entire bottom edge of the skirt or dress using broad points.
     3. Make a template for the waves. Choose a cup or a saucer and place it on cardboard. Trace about half of the glass or the saucer over the edge of the cardboard with a pencil. Repeat this process three or four times to obtain a mold with a length of about 25 cm and cut it.
     4. Place the mold waves along the bottom edge of the lining of the skirt or dress. Make sure the edges are aligned so that the waves are not pies cheap wedding dresses big sizes(http://www.weddingdresstrend.com/en/plus-size-wedding-dresses ) . Trace the boundary of the waves on the liner with the soluble tracer, moving the mold to the next part when needed. When finished, you will have the contour of the corrugated sheath around the entire bottom edge of the skirt or dress.
     5.Coloque pins around the wavy hem. Sew along it with a straight stitch. Be careful when sewing the waves, especially when they meet. You may need to take your foot off the pedal with the needle down to reposition the fabric. Do the stitching to begin and end the waves. Remove the pins.
     6.Passe the waves with a hot iron. Trim each 0.5 cm below the line that has just been sewn. Make sure you cut very carefully the inner corners, where the waves meet and be careful not to cut the seam.
     7.Put the skirt or the dress part of the lining inside. Be sure to completely pass all edges of each wave around the part http://www.weddingdresstrend.com/attractive-a-linescoop-neck-tea-length-chiffon-mother-of-the-bride-dress-with-ruffles-wdm81506048.html . Pass it carefully. Make apparent seam 0.5 cm from the bottom of the waves to give the finish to the dress or skirt.

   • Tags: wedding how dress make ceremony big cheap dresses wavy accessory setscheap sizeswedding hem

   • This item has 0 comments

     Register or Login to leave a comment